Special Elbows

We can produce a variety of non standard elbows, in the many years we have been supporting our customers with their special requirements we have produced a wide variety of bespoke elbows.


Elbows with special angles.

Elbows can be supplied dimensionally to ASME B16.5 but at nonstandard angles. Following the standards dimensions, all elbows from 1° to 45° would be supplied with the same CL-F as the ASME B16.5 45° elbow. Elbows that have an angle from 46° to 90° would adopt the same CL-F dimensions as the B16.5 90° elbows.


Elbows with special dimensions.

Falling outside of the dimensions of ASME B16.5, CRP are able to offer a wide range of HiPerFlon PTFE lined elbows to suit particularly challenging installation applications or particular process requirements.


Elbows with trunnions and supports etc.

We strongly advise against carrying out any welding on our PTFE lined products due to the great risk of the heat generated damaging the lining. If supports are required we can fabricate these and weld them to the fitting before we line it with the PTFE ensuring the integrity of the product. We produce these supports to the customers drawings.


Elbows with special flanges.

We can produce elbows with a mixture of ASME and DIN or BS 10 flanges or with special bespoke flanges.

As with all our fittings we can supply elbows lined in both virgin and antistatic HiPerFlon PTFE high performance linings.

The steel is usually carbon steel but we also offered PTFE lined stainless steel too, for use in clean room or where external corrosion is a problem such as marine environments.