Pipe Spool for Field Flare With Slide Fit Liner & One Rotating Flange Type ES1038

This pipe spool is designed to allow field fabrication of pipe spools by the customer. The pipe spool is provided with one factory finished rotating flanged end with welded stub/ taft end. The other end is supplied with a slip on weld flange and the pipe is ready to be cut, have the flange welded on and the PTFE flared to complete the spool on site to the exact length.

   PTFE Lined Field Flare Spool



The pipe spools are ideal for rapid manufacture of closers on site. The paste extruded PTFE liner is specially heat set within the steel pipe to become a loose fit. The steel is provided 100mm longer than ordered. with an additional 100mm of PTFE liner protruding. The slip on flange is tack welded to the pipe to prevent loss. The liner is withdrawn sufficiently to cut the pipe to the correct length and then the flange is welded in position.  The liner is refitted and flared, producing a fixed/ rotating welded construction pie spool. CRP can offer full training and certification for field flaring on site of PTFE pipe spools. Further information on this can be found here.  A full range of field flare tooling can be supplied, please contact us for a quotation
Field flare pipe spools are available from 1”NB to 4” NB up to 3000mm long.

For a quotation please contact us on 01706 756 400 or enquiry@crp.co.uk
If you would like further information on the procedures of field flare lined piping fabrication please click here.

Contact Details

Corrosion Resistant Products Ltd
Todmorden Road
Littleborough
OL15 9EG

Phone: +44(0)1706 756400
Fax: +44(0)1706 379567
Email: