Pipe Spool For Field Flare With Slide Fit Liner Type ES1048
This pipe spool is designed to allow field fabrication of pipe spools by the customer. The pipe is cut to the correct length required on site, the flanges are welded / threaded in position and the PTFE flared to produce a finished pipe spool.
| Inches |
mm |
mm |
mm |
mm |
| 1" |
25 |
3.3 |
500 |
5900 |
| 1.1/2" |
40 |
3.3 |
500 |
5900 |
| 2" |
50 |
3.3 |
500 |
5900 |
| 3" |
80 |
3.3 |
500 |
5900 |
| 4" |
100 |
4.5 |
500 |
5900 |
The pipe spools are ideal for rapid manufacture of closers on site. The paste extruded PTFE liner is specially heat set within the steel pipe to become a loose fit. The steel is provided 100mm longer than ordered with an additional 100mm of PTFE liner protruding. The steelwork has predrilled vent holes along its lengths. The liner is withdrawn sufficiently to cut the pipe and weld the flanges in position. The liner is then refitted and flared. CRP can offer full training and certification for field flaring on site of PTFE pipe spools. Further information on this can be found here. A full range of field flare tooling can be supplied, please contact us for a quotation
Field flare pipe spools are available from 1”NB to 4” NB up to 3000mm long
CRP can supply all types of flanges and stub ends along with the piping to fabricate the spool.
For a quotation please contact us on 01706 756 400 or enquiry@crp.co.uk
If you would like further information on the procedures of field flare lined piping fabrication please click here.